Bohus Stickning Palmen Röd

1125 kr - 4495 kr

Palmen Röd, known in English as "The Red Palm" was designed for Bohus Stickning by Kerstin Olsson in 1967. It forms a part of the very beautiful Palmen series of designs which were released during the mid to late 1960's. 

The knitting kit for Palmen Röd was recreated in 2005 from original charts and garments held in museum collections, in consultation with Kerstin Olsson. The design is available as knitting kit for a pullover /cardigan with a round yoke, as a hat, as a tam and and as a triangular scarf. 

The garment is knitted on cherry red base in an angora yarn spun from 50% hand-cut angora wool from our own angora rabbits and 50% New Zealand merino wool. The pattern yarns are hand-dyed by Pernille Silfverberg to match the original yarns. The yarn is spun in Denmark at Henrichsens Uldspinderi.

Language of the knitting description
Total products
Total options
Total amount

Product description

The knitting kit for pullover/cardigan

The kit contains enough yarn to knit a pullover or cardigan in the largest size XL, which corresponds to the garment's measurement of 117 cm around the chest, and instructions to knit a recreation Design of the original Bohus Stickning pattern in sizes from 92 cm for 117 cm. The model can be worked with an elastic neck or a folded neck edge, both of which are described in the instructions. The kit also includes a printed pattern chart with yarn samples for and 8 pattern yarns to use as reference.

The garment is worked from the top down in AngoraGarnets angora/merino yarn. The patterned yoke for design is worked with a maximum of two pattern yarns in one round with a knitting tension of 33 stitches/10 cm. Only knit and purl stitches are used. The cardigan is worked back and forth while the front edge for buttons are worked side by side. The jumper is worked in the round on circular needles, then the front and back pieces are worked in stockinette stitch back and forth and seamed to mimic its original construction. Knitting needles are not included in the knitting kit, but typically 2.0 mm - 2.5 mm needles are needed to achieve the correct knitting tension.

The buttons on the original garment were mother-of-pearl buttons 12 mm in diameter with two holes and a small notch between them. Buttons are not included in the knitting kit.

 

The knitting kit for hat, tam and triangular scarf

The knitting kit contains yarn and instructions to knit a recreated Design of the original Bohus Stickning pattern as hat and tam, respectively, and triangular scarf. The knitting kit also includes a printed pattern chart card with yarn samples for of the 8 pattern yarns of the pattern piece to use as a reference.

The garment is knitted in AngoraGarnets angora/merino yarn. The pattern in the design is worked with a maximum of two pattern yarns in one row with a knitting tension of 33 stitches/10 cm. Only knit and purl stitches are used. For hat an edge is knitted in garter stitch that can be folded in, which also means that the hat is adjustable in size. For tam a double folded rib is used. The triangle shawl is worked in stockinette stitch back and forth. Knitting needles are not included in the kit, but typically 2.0 mm - 2.5 mm needles are needed to achieve the correct knitting tension.

 

Yarns included in the kit

Deep fuchsia base with color no. 339. Pattern yarns color no. 208, 200, 327, 76, 194, 247, 175, 416 

 

Please note: Pattern colours for this design are hand dyed by Pernille to ensure they correctly match the original design. Please anticipate that it may take 3 weeks before you receive notice that your kit has been put together and sent to you. During busy periods or holidays (or if more than a couple of pattern colours are out of stock and need to be dyed for you) this may be extended.

 

Bohus Stickning Palmen Röd after original Bohus Stickning
Design Kerstin Olsson for Bohus Stickning 1967
Recreated in 2005 by Solveig Gustafsson and revised in 2016 by Pernille Silfverberg, AngoraGarnet
Design and Copyright owner of the trademark Bohus Stickning

Bohus Stickning knitting kits are sold exclusively through AngoraGarnet. A small selection of kits are also available from Bohusläns museum shop. The knitting instructions are licensed for individual use only. They may not be copied or offered for sale commercially. Knitting instructions for Bohus Stickning are only sold together with yarn.

 

Description

The knitting kit for pullover/cardigan

The kit contains enough yarn to knit a pullover or cardigan in the largest size XL, which corresponds to the garment's measurement of 117 cm around the chest, and instructions to knit a recreation Design of the original Bohus Stickning pattern in sizes from 92 cm for 117 cm. The model can be worked with an elastic neck or a folded neck edge, both of which are described in the instructions. The kit also includes a printed pattern chart with yarn samples for and 8 pattern yarns to use as reference.

The garment is worked from the top down in AngoraGarnets angora/merino yarn. The patterned yoke for design is worked with a maximum of two pattern yarns in one round with a knitting tension of 33 stitches/10 cm. Only knit and purl stitches are used. The cardigan is worked back and forth while the front edge for buttons are worked side by side. The jumper is worked in the round on circular needles, then the front and back pieces are worked in stockinette stitch back and forth and seamed to mimic its original construction. Knitting needles are not included in the knitting kit, but typically 2.0 mm - 2.5 mm needles are needed to achieve the correct knitting tension.

The buttons on the original garment were mother-of-pearl buttons 12 mm in diameter with two holes and a small notch between them. Buttons are not included in the knitting kit.

 

The knitting kit for hat, tam and triangular scarf

The knitting kit contains yarn and instructions to knit a recreated Design of the original Bohus Stickning pattern as hat and tam, respectively, and triangular scarf. The knitting kit also includes a printed pattern chart card with yarn samples for of the 8 pattern yarns of the pattern piece to use as a reference.

The garment is knitted in AngoraGarnets angora/merino yarn. The pattern in the design is worked with a maximum of two pattern yarns in one row with a knitting tension of 33 stitches/10 cm. Only knit and purl stitches are used. For hat an edge is knitted in garter stitch that can be folded in, which also means that the hat is adjustable in size. For tam a double folded rib is used. The triangle shawl is worked in stockinette stitch back and forth. Knitting needles are not included in the kit, but typically 2.0 mm - 2.5 mm needles are needed to achieve the correct knitting tension.

 

Yarns included in the kit

Deep fuchsia base with color no. 339. Pattern yarns color no. 208, 200, 327, 76, 194, 247, 175, 416 

 

Please note: Pattern colours for this design are hand dyed by Pernille to ensure they correctly match the original design. Please anticipate that it may take 3 weeks before you receive notice that your kit has been put together and sent to you. During busy periods or holidays (or if more than a couple of pattern colours are out of stock and need to be dyed for you) this may be extended.

 

Bohus Stickning Palmen Röd after original Bohus Stickning
Design Kerstin Olsson for Bohus Stickning 1967
Recreated in 2005 by Solveig Gustafsson and revised in 2016 by Pernille Silfverberg, AngoraGarnet
Design and Copyright owner of the trademark Bohus Stickning

Bohus Stickning knitting kits are sold exclusively through AngoraGarnet. A small selection of kits are also available from Bohusläns museum shop. The knitting instructions are licensed for individual use only. They may not be copied or offered for sale commercially. Knitting instructions for Bohus Stickning are only sold together with yarn.

 

Further information

Weight 0.48 kg
Knitting Kits

pullover/cardigan with a round yoke, hat, tam, triangular scarf, wristlets

Design

tam, pullover/cardigan, hat, a round yoke

Color scheme